Winter Storm Prep Checklist for Tompkins County Homeowners: Generators, Panels and Wiring

Electrician testing a standby generator transfer switch at a snowy Tompkins County home

Winter storm prep in Tompkins County comes down to three electrical checks: test your generator under load, make sure your panel can carry winter demand, and look for wiring problems before extra heaters and a generator hookup expose them. Wet, heavy snow brings branches down on lines across Ithaca and the surrounding towns, and the homes that ride out an outage best are the ones where someone ran this checklist in the fall, not after the lights went out.

A single late-April storm left nearly 200,000 New York customers without power, with the Southern Tier among the hardest-hit regions as heavy snow brought down trees and lines. Pleasant Valley Electric has worked on homes and businesses across Ithaca and Tompkins County since 1983, and this is the list we would want every homeowner to work through before the first big storm.

Get your generator storm-ready before the first outage

A generator that has not run since spring is a gamble. Fuel goes stale, batteries drain and connections corrode while the unit sits. The time to find out your generator will not start is not 2 a.m. with the furnace off.

Test it under load

Running the generator under a real load, not just idling, tells you whether it can carry your home. A unit that starts fine but stalls once a few appliances are connected has a problem worth finding now.

  • Run the unit for at least 15 minutes under load
  • Replace fuel that has sat since last season rather than assuming it is still good
  • Test the starting battery if your generator has one
  • Listen for unusual noises that point to a mechanical issue

Check the transfer switch

A standby generator with an automatic transfer switch starts within seconds of an outage without you doing anything. A portable generator has to be connected by hand, which matters when the power drops at 3 a.m. in freezing weather. Either way, the switch or interlock needs periodic inspection, because corrosion and loose connections can develop even when everything looks fine.

  1. Confirm the switch engages correctly during a test cycle
  2. Look for corrosion at the connection points
  3. Check the switch is rated for your generator's output
  4. Have a licensed electrician inspect it if it has not been serviced in over a year

Homeowners who skip this often find out the hard way: the generator runs, but the house never switches over to it.

Plan fuel and maintenance for the whole season

One tank rarely covers a multi-day outage. Know how long your generator runs on a full tank and how you will refuel safely. Natural gas and propane units remove the fuel-storage problem but still need oil changes and filter checks on the manufacturer's schedule. Properties on long rural roads outside Ithaca can wait longer for power to come back, which makes a well-maintained generator even more valuable there. Our post on generator readiness for storm season goes deeper on maintenance.

Check whether your panel can handle winter demand

Winter changes what your electrical panel is asked to do. Space heaters, longer lighting hours and a generator connection all add load that an older or undersized panel may not be built for. A panel that struggles in October can fail in January.

Fire departments respond to an estimated average of 38,881 home heating equipment fires each year, according to the National Fire Protection Association, and space heaters account for a large share of those fires and most of the deaths and injuries.

Signs your panel is already struggling

  • Breakers tripping more often, especially with space heaters running
  • A panel cover that feels warm
  • Lights flickering when several appliances run at once
  • A burning or rubbery smell near the panel
  • Rust or corrosion on the panel box

Any one of these is worth a look. Two or more together usually means the panel needs attention before winter pushes it further. If the real issue is frequent breaker trips on one circuit, that is worth diagnosing before assuming the whole panel must go.

Match your panel to a generator connection

Connecting a generator without an interlock kit or properly rated transfer switch creates backfeeding, which can injure utility workers restoring power to your street. Never plug a generator into a wall outlet. Have an electrician size the connection to your generator, install the right hardware and label the panel so anyone in the house can use it safely.

Know when a panel upgrade makes sense

Many older Tompkins County homes have panels sized for a much lighter load than a modern household uses. Adding a generator, an EV charger or several space heaters to an old 100-amp panel can push it past what it was designed for. An electrician can check the panel's age, amperage and condition and tell you honestly whether it needs an upgrade or a smaller fix. Our panel upgrade cost guide explains what drives the price.

Spot wiring problems before a storm makes them worse

Wiring problems rarely announce themselves. They show up as a flickering light or a warm outlet until a storm adds load and turns a small issue into a real one. Wiring that has been quietly failing often gets exposed the moment a generator or extra heater is connected.

Walk through outlets and switches

  • Outlets or switches that feel warm in normal use
  • Sparks when you plug something in
  • Discoloration around an outlet cover
  • Cords that get hot during use
  • Outlets that have stopped working

Finding these before a storm means you can book an electrician on your schedule instead of during an emergency when everyone else is calling. Active outlet sparks should not wait.

Extension cord and space heater habits

  1. Plug space heaters straight into a wall outlet, not a power strip or extension cord
  2. Never chain extension cords together
  3. Keep heaters at least three feet from anything that can burn
  4. Turn heaters off when you leave the room or go to sleep

When the grid comes back after an outage, watch for surge damage symptoms in electronics and appliances.

Older wiring in Ithaca-area homes

Many older homes in Ithaca still have original or mixed wiring that was never designed for today's loads, including knob-and-tube in some pre-war houses. Extra heaters and a generator hookup expose weaknesses that stay hidden the rest of the year. If your home has not had an electrical inspection in several years, a walkthrough in the fall is far easier than a failure in a January storm.

Build a storm-season routine

Storm prep works best as a yearly routine, not a scramble the week snow is forecast.

  • Test the generator under load and refresh old fuel
  • Inspect the transfer switch or interlock
  • Check the panel for warning signs
  • Test outlets and switches around the house
  • Confirm smoke and carbon monoxide alarms work and have fresh batteries (see fire alarm systems)

Testing a generator, checking for warm outlets and changing alarm batteries are reasonable DIY tasks. Panel work, interlock installation and anything at the service entrance should go to a licensed electrician.

Generator safety is not optional

Carbon monoxide from portable generators is one of the deadliest winter storm risks, according to the Consumer Product Safety Commission. Run portable generators outside only, at least 20 feet from the house, with the exhaust pointed away from windows, doors and vents, and install battery-backed CO alarms outside every sleeping area.

Frequently asked questions

When should I do winter storm prep in Tompkins County?

October and November are ideal. You can book an electrician on your schedule and fix anything that turns up before the first big storm.

Can I plug my portable generator into a wall outlet?

No. That backfeeds power into the lines and can injure utility workers. Use a properly installed transfer switch or interlock kit.

Is my 100-amp panel enough for a generator?

Sometimes. It depends on what the generator will power and what the panel already carries. A load calculation answers it; see our guide to whole-house generator costs for the bigger picture.

Do you serve homes outside Ithaca?

Yes, including Lansing, Dryden, Trumansburg and the rest of Tompkins County, with emergency service 24/7.

Dealing with storm prep in Tompkins County? Call Pleasant Valley Electric at (607) 272-6922.

GET TRUSTED HELP FROM LOCAL ELECTRICIANS

Have Questions About an Electrical Issue in Your Home or Business?

Whether you are dealing with flickering lights, outdated wiring, breaker problems, or planning a larger electrical upgrade, Pleasant Valley Electric is here to help. Our licensed electricians provide dependable service, honest recommendations, and fast response times throughout Ithaca and surrounding communities.

Request A Service

We call you back within 30 minutes during business hours.

Thank you! Your submission has been received, a member of our team will contact you shortly.
Oops! Something went wrong while submitting the form.